A couple of companies have been jumping the gun on DDR4 production, but the JEDEC Solid State Technology Association is finally bringing order to the industry by releasing its official standard for the next-gen DRAM. It calls for "higher performance, with improved reliability and reduced power" -- which we roughly take to mean: less gigs for better rigs. The DDR4 per-pin data rate standard is 1.6 gigatransfers per second (GT/s) at the minimum and 3.2 GT/s at the top-end, although this cap is expected to increase in future updates (given that DDR3 also surpassed its initial target). Speeds will begin at 2133MHz, a significant jump from your average DDR3 stick, and will also operate at lower power thanks to the Pseudo Open Drain Interface. Check out the PR below if you want to delve deeper into the specs, and if even that's not enough to sate you, head to the source link below to tackle the full documentation. Godspeed!
Continue reading JEDEC announces final DDR4 RAM specification
Filed under: Desktops, Laptops
JEDEC announces final DDR4 RAM specification originally appeared on Engadget on Wed, 26 Sep 2012 10:47:00 EDT. Please see our terms for use of feeds.
Permalink
PCWorld | 
JEDEC | Email this | Comments
Source: http://feeds.engadget.com/~r/weblogsinc/engadget/~3/IPzmGSqTxL0/
No comments:
Post a Comment